四川省口腔装备材料检验检测中心

CISPR 11:2016

Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement

环境试验 第2部分：试验方法 试验N：温度变化 7试验Na

IEC 60068-2-1:2007

Environmental testing - Part 2: Test methods - Tests A: Cold /

IEC 60068-2-2:2007

Environmental testing - Part 2: Test methods - Tests B: Dry heat /

IEC 60068-2-78：2012

Environmental testing—Part 2：Testing method—Test Cab:Damp heat,steady state /

IEC 60068-2-30:2005

Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat，cyclic ( 12h+12h cycle) /

IEC 60068-2-27:2008

Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock /

IEC 60068-2-6:2007

Environmental testing—Part 2:Test methods—Test Fc:Vibration(sinusoidal) /

IEC 60068-2-11:2021

Environmental testing—Part 2: Test methods—Test Ka: Salt mist /

IEC 60068-2-52:2017

Environmental testing—Part 2: Test methods—Test Kb:Salt mist, cyclic（sodium chloride solution） /

IEC 60068-2-13:1983

Environmental testing - Part 2: Test methods - Test M: Low air pressure /

IEC 60068-2-14:2009

Environmental testing - Part 2: Tests methods - Test N: Change of temperature test Na

IEC 60068-2-5:2018

Environmental testing—Part 2: Test methods—Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering /

IEC 60068-2-38:2021

Environmental testing—Part 2:Test methods—Test Z/AD: Composite temperature/humidity cyclic test /

IEC 60068-2-53: 2010

Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests /

IEC 60529:2013

Degrees of protection provide by enclosure (IP code) /

IEC 60068-2-67:1995

nvironmental testing - Part 2: Test methods - Test Cy: Damp heat，steady state，accelerated test primarily intended for components /

IEC 60068-2-39:2015

Environmental testing—Part 2: Test methods—Test method and guidance: Combined temperature or temperature and humidity with low air pressure tests /

IEC 61000-4-11:2020

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase

IEC 61000-4-8:2009

Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test

IEC 61000-4-6:2023

Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields

IEC 61000-4-5:2014

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

IEC 61000-4-4:2012

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test

IEC 61000-4-3:2020

Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test

IEC 61000-4-2:2008

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

IEC 61000-3-3:2013

Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase and not subject to conditional connection